Pro duct7 - Bulk Cloned-manufacture,factory,supplier from China

The raw materials for making particleboard include wood or wood fiber materials, adhesives and additives. The former accounts for more than 90% of the dry weight of the board. The wood raw materials are mostly taken from felled wood in the forest area, small diameter wood (usually less than 8 cm in diameter), felling residues and wood processing residues. Wood chips, shavings, wood filaments, sawdust, etc. processed into flakes, strips, needles and granules are called chips.

Fire Resistant MDF Features:1.Excellent flame retardant performance: Comply with the B1-B/B1-C regulations of GB8624-2012 "Classification of Combustion Behavior of Building Materials and Products". 2. Excellent environmental protection performance: the amount of formaldehyde released has reached the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

What is Fire Resistant MDF ?How to produce it ? What is its application?The fireproof board is a kind of board that can suppress the burning speed of the flame in the ignited state, or directly extinguish the flame.

 Advantages of FR MDF/Fire Resistant MDF 1.Excellent flame retardant performance: Comply with the B1 regulations of GB8624-2012 "Classification of Combustion behavior of Building Materials and Products".2.Excellent environmental protection performance: the amount of formaldehyde released reaches the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

What is FR MDF?    Fire-resistant and flame-retardant panels (FR MDF) are made by adding flame retardants and adhesives to wood fibers through continuous hot pressing. They are mostly used in public places that must meet strict fire regulations, as well as building interior decoration, production of flame-retardant furniture and flame-retardant floors, and wooden fire doors. Production, ship and vehicle interior decoration, etc.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

According to density, it can be divided into: high-density fiberboard, medium-density fiberboard, and low-density fiberboard (the density of medium-density fiberboard is 500 kg/m3-880 kg/m3, and the density of high-density fiberboard is ≥800 kg/m3).According to the national standard (GB/T 11718-2021), it is divided into: ordinary MDF, furniture MDF and load-bearing MDF.According to the use, it can be divided into: furniture board, floor base material, door panel base material, electronic circuit board, engraving and milling board, moisture-proof board, fire-proof board and line board

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

Our Services:1. All inquires will be replied with 24 hours;2. Sample charge will be REFUNDED after you placed order;3. Strictly Quality Control by Professional QC Team;4. Factory Direct Competitive Price, One Stop Service, OEM Service Offered;5. Various Designs, Sizes & Colors are available;6. Selected High Quality Raw Material, Aesthetic appearance, High-End finishes;7. We can supplied EXW,FOB,CIF,DDU shipping terms;8.

High Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fibers or other plant fibers with the application of urea-formaldehyde resin or other applicable adhesives.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

What is medium density fiberboard (MDF)?      Medium density fiberboard (MDF) is a kind of man-made board made of hardwood, softwood fiber or other plant fiber, which is crushed, separated, dried, applied with urea-formaldehyde resin or other suitable adhesives, and then hot-pressed. Medium-density fiberboard (MDF), generally denser than plywood, is made of separated fibers, but like plywood can be used as a building material.

MDF Products on show Products detailsProduct:MDFMaterial:Polar Pine Combi HardwoodGlue:MDI WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:6-45mm or accept customizationMOQ:20 CBMDelivery time:15 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsageRoof decking, furniture,packing,hoarding,signboards, portable building, constructional insolation boardQuestions about MDF products.Q 1.

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.

Oriented Strand Board Introduction:Oriented strand board (OSB), also called European pine board, is made of small diameter wood, interfelled wood, wood core, board veneer, branch Y wood, etc., and processed into 90-130mm long, 5-30mm wide and 0.5mm thick strands in the direction of wood grain by special planing equipment (long wood planer or two-stage chipping planing equipment), then dried, glued, and formed in the prescribed direction by hot pressing.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

The difference between medium density fiberboard and particle board is so bigAbstract: There are many types of man-made panels, and many friends are always unclear when they are decorating. Some friends always can't tell the difference between particleboard and density board. In fact, as long as you know the two kinds of boards, it is very simple to distinguish them.1. MDF and particle board materials are differentParticleboard is processed by high temperature and high pressure after the logs are broken, and the wood chips are the main raw materials.

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.

    Advantages of Carbon Crystal Medium Density Fibreboard:1. High environmental protection performance.The product does not need to be painted after coating, reducing the harm of formaldehyde to human body, and the environmental protection grade is higher than the national environmental protection standard. 2.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

    OSB board is the upgrading of traditional particle board.

Why is Black Core MDF popular in the wooden door industry?     Carbon is a non-metallic element that is stable at room temperature, unreactive, and has extremely low toxicity to the human body. It can be safely ingested in the form of graphite or activated carbon. Carbon crystal, the full name of carbon microcrystal, is a crystal structure of carbon.