product10-manufacture,factory,supplier from China

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

Particleboard Quality Judgment1. From the appearance point of view, look at the size and shape of the wood chips in the center of the cross-section. The length is generally 5-10MM in length. If the length is too long, the structure is loose, and if it is too short, the deformation resistance is poor, and the so-called static bending strength does not meet the standard;2. The moisture resistance of wood-based panels depends on its density and moisture-proof agent.

      Waterproof and moisture-proof board is made by adding special materials that can improve the waterproof, moisture-proof and mildew-proof performance of wood-based panels during the production of medium-density fiberboard.   It is suitable for high-humidity areas and places where accidental humidity may occur, such as kitchens Cabinets, bathroom vanity, laundry cabinet. Marked in green.

     The Waterproof fiberboard originated in Europe. It is based on the production of ordinary fiberboard and added with a certain proportion of granular moisture-proof particles. The fiberboard made in this way can greatly reduce the degree of expansion after encountering water.             Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.

1. Physical and mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength and elastic modulus are good. However, because MDF is made of logs that are ground into fibers, which completely changes the structure of the wood, it has higher moisture absorption, water absorption performance, and higher thickness expansion rate, and its nail holding power is worse than that of particleboard.2.

What is OSB ?Oriented Strand Board (OSB) is a kind of fresh wood with large diameter and straight trunk as raw material. It is processed along the direction of wood grain by special slicing processing equipment.

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.

Advantages and disadvantages of density boardadvantage:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

MDF product advantages and development prospects    The surface of MDF is smooth and not easily deformed, the performance is stable, and the edges are relatively strong and firm; the thermal insulation performance is good, and the tensile strength is high. These characteristics are more suitable for furniture manufacturing and interior decoration of construction projects.

Instruction of Waterproof FiberboardWaterproof Fiberboard, also known as fiberboard , is an artificial board made of wood fiber or other plant fibers as raw materials and urea-formaldehyde resin or other suitable adhesives.Warehouse  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

     The basic unit of fiberboard is separated wood fibers or fiber bundles. The raw materials for fiber production mainly come from forest cutting residues, such as branches, shoots, small diameter wood, etc; And wood processing residues, such as board edges, shavings, sawdust, etc. In addition, the wastes from chemical processing of forest products (such as tannin extract and hydrolytic residues) and other plant stems can be used to produce fibers. The fiber content of coniferous wood is high, and the fiber length is 30-50% longer than that of hardwood.

The wood-based panel is formed by interweaving lignocellulose fibers and is made of its inherent adhesive properties. Adhesives and/or additives may be applied during manufacturing.Fiberboard, also known as density board, is a wood-based panel made of wood fiber or other vegetable fibers with urea formaldehyde resin or other applicable adhesives. Adhesives and/or additives may be applied during manufacturing. Fiberboard has the advantages of uniform material, small vertical and horizontal strength difference, and is not easy to crack. It is widely used.

The wood-primarily based panel is fashioned by interweaving lignocellulose fibers and is made of its inherent adhesive properties. adhesives and/or components can be applied for the duration of production.Fiberboard, also called density board, is a wood-primarily based panel made from wood fiber or unique vegetable fibers with urea formaldehyde resin or different relevant adhesives. adhesives and/or components can be applied at some point of manufacturing. fiberboard has the blessings of uniform cloth, small vertical and horizontal power difference, and isn't easy to crack.

    Fiberboard, also referred to as density board, is a timber-primarily based panel made of wood fiber or exceptional vegetable fibers with urea formaldehyde resin or other relevant adhesives. adhesives and/or additives can be carried out sooner or later of manufacturing. fiberboard has the benefits of uniform , small vertical and horizontal power distinction, and isn't easy to crack. it's miles considerably used.

    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.The thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF. The density of MDF is generally It is in the range of 0.5-0.8g/cm³.

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. This kind of man-made board is often used in interior decoration.Xinhua Wood Storage  Quality Certificates  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan.

     Density board is called medium density fiberboard（MDF) . It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure. According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. It is widely used in the fields of furniture manufacturing and decoration in China.Xinhua Wood Show  Xinhua Wood Machinery  Gaotang County Xinhua Wood Industry Co., Ltd.

     Particleboard, also known as chipboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

The raw materials for making particleboard include wood or wood fiber materials, adhesives and additives. The former accounts for more than 90% of the dry weight of the board. The wood raw materials are mostly taken from felled wood in the forest area, small diameter wood (usually less than 8 cm in diameter), felling residues and wood processing residues. Wood chips, shavings, wood filaments, sawdust, etc. processed into flakes, strips, needles and granules are called chips.

What is the main reason for the deformation of density board?The main reason for the deformation of the density board is the production process or the storage and use process.1.